Minggu, 17 Maret 2013

Silabus Bulan April 2013, Lets Training On MGTC

SILABUS DAN DETAIL TRAINING BULAN APRIL 2013

Silabus 1 Practical Supply Chain Management
Silabus 2 Operational Risk Management
Silabus 3 Basic Drilling Engineering and Health, Safety &
Environmental Consideration

Silabus 3 Programmable Logic Controller (PLC):
Advanced And Applicated

Silabus 4 Power Electrical Installation System

Pelaksanaan tanggal 2-5 April 2013

SILABUS 1
PRACTICAL SUPPLY CHAIN MANAGEMENT
DESKRIPSI TRAINING
Kompetensi yang semakin tinggi memaksa setiap perusahaan untuk dapat menjalankan
operasionalnya secara lebih efisien, baik dari sisi biaya, waktu, maupun prosesnya.
Supply Chain Management (SCM) saat ini telah terbukti merupakan salah satu jawaban
dan paradigma baru dalam mencapai keunggulan tersebut. Semakin banyak
perusahaan-perusahaan kelas dunia yang berhasil menerapkan aplikasi supply chain
management ini sehingga konsep inipun semakin berkembang pesat.
training ini akan menguraikan secara komprehensip praktek-praktek terbaik (best
practices) dari aplikasi supply
perusahaan yang sudah menjalankan ataupun belum menjalankan supply chain management.

TUJUAN TRAINING
  • Memberikan pemahaman mengenai konsep SCM secara menyeluruh
  • Memberikan pemahaman keterkaitan antara strategi perusahaan dengan SCM
  • Memberikan pemahaman bagaimana keterkaitan antar proses dan aplikasi penerapannya
  • Memberikan pemahaman bagaimana membangun strategi operasi dan produksi berdasarkan SCM
  • Memberikan pemahaman best practice SCM
MATERI TRAINING
1. Supply Chain Management
  • Supply chain merupakan jawaban permasalahan
  • Anatomy supply chain
  • Supply Chain Metrics
2. Core Processes Of Supply Chain Management
  • Planning and forecasting
  • Procurement
  • Transportation & Logistic
  • Distribution & warehousing
  • Location
  • Customer service
3. Supply Chain Strategies
  • Developing Supply Chain Strategies
  • Best Practice Supply Chain Strategies
 SASARAN PESERTA
Supply Chain Officer/Staff, Logistic Managers, Materials managers, purchasing
managers, buyers, quality control technicians, quality control managers, plant
managers, industrial and operations managers and product managers.

INSTRUKTUR
Miftahol Arifin, ST.MT dan Team
Pendidikan:
  • S1 Jurusan Teknik Industri ITS Surabaya tahun 1991 – 1996.
  • S2 Teknik Industri ITS Surabaya tahun 1998 - 2000.
Pengalaman Kerja :
  • Bapak Miftahol adalah seorang instruktur training sehingga beliau mempunyai banyak pengalaman dengan beberapa judul seperti Manajemen Inventory.
  • 5S In The Office For House Keeping, Logistik Manajemen terpadu, Manajemen Inventory, Design of Eksperimen, Aplikasi Manajemen Pergudangan yang efektif, Operational Excellence wuth Lean manufacture, Cost Reduction Logistic, Teknik Peramalan Inventory, Enterprise Resource Planning, Supply Chain Management, Basic Welding Inspection And Quality Control, material knowledge (warehousing).
  • Bidang Peminatan beliau adalah Simulasi Sistem, Optimasi Sistem, Pemodelan system.
  • Beliau juga aktif dalam berbagai pengalaman penelitian diantaranya adalah Menggunakan data mining untuk menjelajahi keteraturan algoritma genetik pada masalah jadwal aliran toko 2007, dipresentasikan pada Konferensi Internasional Teknik Industri dan Manajemen Rekayasa, Singapura. Pada Aplikasi Data Mining dengan algoritma genetik untuk Analisis Pasar Keranjang di Supermarket 2005, Sumber dana bahasa Kemudian beliau juga aktif dalam publikasi diberbagai organisasi yang beliau ikuti.
PELAKSANAAN
02 – 05 April 2013


SILABUS 2
OPERATIONAL RISK MANAGEMENT

COURSE OBJECTIVES
  • This unique training workshop addresses the fundamental causes of risk and delegate with a simple, Systematic Control and Management Program to achieve control.
  • Find a systematic and simple way to solve your most difficult problems
  • Understand the crucial role of a responsible management philosophy in controlling risk.
  • Develop the skills to provide focused information media which will provide the catalyst for effective risk control.
  • Recognize the value of an experienced and well motivated Operational Risk team.
  • Learn how to focus on those few important areas, rather than get bogged down with trivia
 COURSE OUTLINE
1. Defining Operational Risk
2. The Role of Quality in Controlling and Reducing Risk
3. The Role of Responsibility Management
4. Organization and Reporting Lines
5. Systematic Control Process
6. The BIS/BASEL Accord as it relates to Operational Risk
7. Controlling Costs and Losses
8. The Use of Limits as a Control Mechanism
9. Reconciliation’s, Unmatched and Investigations
10. The Role of Management Information in Controlling Risk
11. The Systematic Control Process Workshop
12. Hedging to Reduce Risk
13. Portfolio Controls
14. Auditors: How to optimize the use of auditors as part of the control process
15. The Role of the Middle Office in Controlling and Mitigating Risk

INSTRUCTOR
Ir. Setyawan Hardan, M.Sc. and Team
Education :
  • Bachelor Degree from Department of Mechanical Engineering Institute of Technology Bandung (ITB) in 1977,
  • and Agricultural Engineering, Central Luzon State University, Philippines, 1987.
  • In addition the formal education, he also attended pelatihan- pelatihan/kursus at home and abroad such as in Netherland, Germany and Australia.
Experience:
  • He has a lot of work experience among Maintenance Engineer, machine tools, PT. Hutama work,
  • Lecturer / Lecturer 10 November Institute of Technology (ITS) Surabaya,
  • Head of Project Procurement NES (Nucleus Estate, for Small Holder (World Bank),
  • Sugar Factory Capacity Evaluation Gempol crepe, PTPN X. Mojokerto, East Java, Planners and construction supervisor Dust Collector Tjukir Sugar Factory, PTPN X East Java, Lecturer / Lecturer,
  • Institute of Education Estates Yogyakarta, Head of Engineering, the Institute of Education Estates Yogyakarta, President Director of PT. LPP
  • Multi Prima Agro Services, Educational Institutions Plantation Yogyakarta, Engineering & Factory maintenance, sugar mills and millers, Assistant Corporate Secretary cum Development Director, PT.
  • Instructor for titles related to the field of mechanical engineering and the Human Resource Development / Management . a lot of companies have been a trainee whom he PT. Pertamina, PT. Chevron, PT. IPMOMI, PT. Semen Gresik, PT. Pusri, PT. Petro Chemical Gresik, PT. Pupuk Kujang, PT. PLN, PT. Medco , PT. Adaro, PT. Arutmin, PT. Pupuk Kaltim, PT. Total Indonesie, PT. Plantation XIII Nusantara, PT. Perkebunan Nusantara X, PT. Perhutani, Hospital, parliament, Party, Ministry of Industry, government, etc. other.
PELAKSANAAN
02 – 05 April 2013

FACILITAS
Sertifikat, Hand Out Materi , Training Kit, Training Material,
Tempat pelaksanaan di Hotel Berbintang dengan fasilitas 2 X CB dan 1 Lunch.
Souvenir.

TEMPAT
Hotel Sahid Rich, Hotel Ibis, Jogjakarta Plaza Hotel,
“Yogyakarta”

KONTAK
MITRA GLOBAL TRAINING CENTER (MGTC)
Telephon (☎) (0274) 5305512
Mobile Phone 0812 2792 6688 /081390398896
Web : http://mitraglobaltrainingcenter.weebly.com
Blog : mitraglobaltc@gmail.com

Kamis, 14 Maret 2013

Training Purna Bakti

Training Purna Bakti Running Tanggal 22 - 26 April 2013, sudah ada peserta yang request dari Perusahaan TOTAL


SILAKAN KUNJUNGI EMAIL KAMI UNTUK INFORMASI SELENGKAPNYA DI mitraglobaltc@gmail.com

Jumat, 08 Maret 2013

Silabus Untuk tanggal 25-28 Maret Part 3

SILABUS DAN DETAIL TRAINING PUBLIK
BULAN MARET 2013


Silabus 1 DANGEROUS GOODS HANDLING
Silabus 2 ELECTRICAL SAFETY
Silabus 3 WELDING ENGINEERING
Silabus 4 ANALISA LAPORAN KEUANGAN & PERENCANAAN
KEUANGAN
5. Silabus 5 MANAGING SERVICES FOR MANAGERS

Pelaksanaan tanggal 25-28 Maret 2013

SYLLABUS 1 :
DANGEROUS GOODS HANDLING

COURSE DESCRIPTION
Dangerous goods or any dangerous substances are might create the problems when they are
transported from one point to another point. In order to reduce even to eliminate the problem,
the industries who product the dangerous goods needs to have persons in charge deal with
transporting that kind of goods. From the description mention above and to overcome the one
who have problems regarding the management system of dangerous goods, therefore we are
conducted “HANDLING DANGEROUS GOODS ”

COURSE OBJECTIVES
  • To make the participants understand the handling of dangerous goods.
  • To make the participants able to manage the dangerous goods thats they product.
  • To improve the skill of participants with regards to the handling of dangerous goods.

COURSE OUTLINE
1. Introduction to the IMDG Code
a. International Regulations
  •  Describe the international regulations concerning dangerous goods transportation.
b. Background to the IMDG Code
  • Explain the background of existence of International Maritime Dangerous Goods (IMDG) Code
c. Using the IMDG Code
  •  Describes the way how to use the IMDG Code
2. Preparing/Receiving Dangerous Goods for Shipment
a. Preparing/Checking packages
  • Explain the way how to check the packaging of Dangerous Goods
b. Preparing/Checking paperwork for packages
  • Explain the fill in of form should be issued by producer or persons who in charge handling of Dangerous Goods.
c. Limited & Excepted Quantities
  • Discuss the number allowed when transporting the Dangerous Goods.
3. Packing & Consolidating Dangerous Goods
a. Selecting & Checking Cargo Transport Units
  • Explain the way how to select and check the transport unit which is used to carry Dangerous Goods.
b. Segregation of packages
  • Explain the segregation of Dangerous Goods when they are they stored in the warehouse and transporting.
c. Packing Cargo Transport Units
  • Describe the Packing of Cargo Transport Units
d. Preparing paperwork
  • Describe the preparation of paper work deal with Packing & Consolidating Dangerous Goods
4. Loading vessels
a. Planning segregation
  • Explain the creating planning of segregation Dangerous Goods
b. Planning stowage
  • Describe the stowage planning on board the ship
c. Preparing paperwork
  • Explain the preparing of Dangerous Goods documents when transpoting on board the ship.

WHO SHOULD ATTEND
  • Manager / official who is responsible to manage dangerous goods.
  • Manager / official who is in charge of transporting dangerous goods.
INSTRUCTUR AND CV
Drs. Istoto Suharyoto, MM and Team
  • Education S-1 : Mechanical Engineering (IKIP Yogyakarta)
  • Education S-2 : Magister Management (MM – UAJ Yogyakarta)
  • Licensed NLP Practitioner Approved by Dr. Richard Bandler, California. USA.
Expert :
  • Marketing management, including segmentation, targeting, positioning, marketing mix,
  • Promotion mix, selling, differentiation, brand, value, and each service as a training unit). 
  • Sales / Salesmanship, including knowledge, attitude and sales skills.
  • Service standards (including greetings, grooming, welcoming, hospitality, telephone courtesy, complaint handling and excellent service).Organizational behavior / development.
  • Communication (such as a personal communicative, Publick speaking, presentations, speeches, mass mobilization, negotiation, problem solving, etc.).
  • Development of human resources (recruitment, palcement, induction, career development, leadership, HR administration, etc.).
  • Personality Building, Coaching & Counseling for personal performance. 
  • Team building. Project Management. Entrepreneurship / entrepreneurship
SYLLABUS 2:
ELECTRICAL SAFETY
 COURSE DESCRIPTION
Electricity is an inherently dangerous but versatile source of energy. When it is utilized
according to sound safety principles, personal injury and property damage can be effectively
prevented. This section contains general information for the safe use of electricity.The course
provides you with working knowledge and best practices to help implement programs in the
areas of electrical safety at workplaces.

COURSE OUTLINE
  • Inroduction of Electrical Safety System 
  • Review of electrical (Low, medium, high voltage)
  • Standard and satutory requirement
  • Indonesian and International Electricity acts and rules
  • Electrical Hazards and cause of fire and explosion
  • Electrostatic, Electromagnet, stored energy
  • Electrical Shock
  • Arc flash hazard protection
  • Personal Protective Equipments (PPE) and equipment for working around electrical hazards
  • Lockout Tagout procedures
  • High voltage procedures
  • Current Surges, Clearence and Insulation
  • Safety of lightning
  • Safety in use of portables tools
  • Grounding System
  • Discharge rod and earthing device
  • Rescue, first aids and Accident prevention
  • Safety management and organization
  • Discuse and case study
INSRUKTUR AND CV
Tugino, ST, MT and Team

Education:
  • Education S1: Bachelor of Electrical Engineering
  • Education S2: Master of Electrical Engineering UGM.
Experience Instruktor:
  • Training Certification Become K3 Electricity 
  • Programmable Logic Controllers
  • Control Valve and Instrumentation 
  • Emergency Generator System 
  • Electrical Inspection Tool Pressure Relief Valve
  • Distributed Control System (DCS) and Supervisory Control and Data Aqcusition (SCADA)
  • Operation, Maintenance and Repair
  • Gas Engine Operation and Maintenance
  • Basic Electricity Instrumentation Process Control
  • Process Control Instrumentation
  • Programming and Application of PLC
  • Harmonics in Power System (causes and prevention, Intallation Planning Information and Computer Interfacing Power Electronics Power). 
  • Diesel Engine Operation and Maintenance
 email kami Mitra Global Training Center: mitraglobaltc@gmail.com


Senin, 04 Maret 2013

Schedule Special Program In March - June 2013

mitraglobaltrainingcenter.weebly.com


REGISTER PASTI RUNNING..:)

BERIKUT KAMI INFORMASIKAN REGISTER TRAINING PADA BULAN MARET 2013


Materi Training Yakni Koordinasi Proteksi Sistem Tenaga Listrik untuk Tanggal 18 - 21 Maret 2013
  
Perusahaan yang telah Register dari PT. Puncak Jaya Power OB-2 Kuala Kencana Timika Papua sebanyak 3 peserta.

Apabila dari perusahaan lain berminat dan tertarik silakan hubungi kami di mitraglobaltc@gmail.com

Terima kasih atas kepercayaan dan kerjasamanya. Kami selalu berkomitmen memberikan pelayanan yang terbaik.

LETS TRAINING ON MITRA GLOBAL TRAINING CENTER..:)

Bulan Maret 2013

SILABUS TRAINING BULAN MARET 2013

SILABUS 1 Oil Spill Response Level 1 (First Responder)
SILABUS 2 Oil Spill Response Level 2 (Second Level Of Response)
SILABUS 3 Introduction To Marine Spill Response For Shipping
SILABUS 4 Introduction to Marine Hazardous & Noxious Substance (HNS) Response at Operational Level (IMO HNS Operational Level)
SILABUS 5 Cashflow Project & Financial Forecast
SILABUS 6 Warehouse And Inventory Management

SYLLABUS 1:
OIL SPILL RESPONSE LEVEL 1 (First Responder) 

COURSE OBJECTIVE
Participant will gain an understanding of the weathering process of oil in the marine
environment, be able to implement an efficient shoreline clean-up utilising different
response techniques, selecting appropriate equipment and managing spill response
teams on-site.

COURSE OUTLINE
  • Site and Risk assessments
  • Health and Safety
  • Selecting the most appropriate response equipment
  • Selecting and implementing clean-up strategies
  • Environmental issues in spill response
  • Waste disposal
  • Managing spill response teams
  • Dealing with the media
  • Record keeping
  • Practical exercises and demonstrations
  • Theoretical exercises

WHO SHOULD ATTEND
This course is designed for all technicians or supervisors who will participate in oil spill
response teams or manage logistics and waste disposal in the field. In addition this
course will provide an in-depth introduction to oil spill response.

INSTRUKT0R & CV
Martono,ST, and team
Education :
  1. From Sebelas Maret University, Major on Occupational Safety & Health Education D III (1991)
  2. Diponegoro University, Major on Environmental Engineering S1 (2004).
  3. He is a trainer like as Training Fire & Safety Training, Training for
Expert and Experience :
Trainers , Hazard and Operability Study (Hazop (s) ), English Course conducted under TCDC Program, Risk Assessment and Analysis, Hazard Analysis and Audit, Safety & Environment Management for Offshore Petroleum Development (JICA Program/ Japan), Accident Investigation Workshop, Oil Industry Development and Management, (KOICA Program/ Korea) , etc. He has many Experience Instructor/Lecturer of Health, Safety and Environment at Oil and Gas Educational and Training Center in Cepu since 1994, Sub section Head of Training Program Planning/Designer of HSE training course at Oil and Gas Educational and Training Center in Cepu (1994 –2000), experience in oil & gas sectors, hazard identification, HAZOP, hazard analysis, Chief of Loss Prevention Profession ( 2004 up to 2009), Functional Lecturer start froms 2009 until now.

 SYLLABUS 2:
INTRODUCTION TO MARINE SPILL RESPONSE FOR SHIPPING

COURSE OBJECTIVE
Delegates will gain an understanding of pre-spill planning, of the legislation regarding
marine pollution caused by vessels, the role of the vessel, owner and insurers, the
actions that the vessel can take towards the spill response operation and the
importance of Health and Safety during an oil spill.

COURSE OUTLINE
  • Introduction to Oil Pollution
  • Pollution Legislation
  • Oil Spill Properties, Behaviour and Fate
  • Health and Safety
  • Environmental Sensitivity and Impacts
  • Response options
  • Contingency Planning – Vessels
  • Oil Spill Response – Onboard
  • HNS Transportation
  • The role of the vessel, owner and insurers
  • Media
WHO SHOULD ATTEND
This course is designed for all seamen (captains, engineers, abs) and the operations
department, SQM department and DPA within a shipping company who would be
involved in the pollution response of an incident caused by their vessel.

INSTRUKT0R & CV
Martono,ST, and team
Education :
  • From Sebelas Maret University, Major on Occupational Safety & Health Education DIII (1991)
  • Diponegoro University, Major on Environmental Engineering S1 (2004).
Expert and Experience :
He is a trainer like as Training Fire & Safety Training, Training for Trainers , Hazard and Operability Study (Hazop (s) ), English Course conducted under TCDC Program, Risk Assessment and Analysis, Hazard Analysis and Audit, Safety & Environment Management for Offshore Petroleum Development (JICA Program/ Japan), Accident Investigation Workshop, Oil Industry Development and Management, (KOICA Program/ Korea) , etc. He has many Experience Instructor/Lecturer of Health, Safety and Environment at Oil and Gas Educational and Training Center in Cepu since 1994, Sub section Head of Training Program Planning/Designer of HSE training course at Oil and Gas Educational and Training Center in Cepu (1994 –2000), experience in oil & gas sectors, hazard identification, HAZOP, hazard analysis, Chief of Loss Prevention Profession ( 2004 up to 2009), Functional Lecturer start froms 2009 until now.

SYLLABUS 3:
CASHFLOW PROJECT & FINANCIAL FORECAST

COURSE OBJECTIVE
At the end of this course, participants will have gained skills to enable them to apply a
structured approach to project justification and investment appraisal. The course will
enable delegates to:
  • understand the use of economic evaluation techniques in project proposals
  • calculate the economic and financial viability of expenditure proposals
  • assess the ranking of alternative projects
  • quantify the impact of risk and uncertainty
  • prepare project expenditure proposals in a way that will win management approval
COURSE OUTLINE
1. INTRODUCTION
  • Project and their management
  • A structured approach to managing projects.
2. THE CONTEXT OF PROJECTS
  • Projects for implementing corporate strategy
  • Strategic management of projects
3. MANAGING THE PROJECT OBJECTIVES
  • Managing scope
  • Managing project organization
  • Managing quality
  • Managing cost
  • Managing time
4. PROJECT FORECASTING AND CALCULATION
Basic concepts
  • The key ingredients of project approval
  • How to get the cost estimate right
How to calculate the Accounting Rate of Return (ARR)
How to calculate project payback
How to calculate Net Present Value (NPV)
The Cost Of Capital - Choosing The right discount rate
How to calculate Internal Rate of Return (IRR)
How to calculate Profitability Index (PI)
7. DECISION MAKING PROCESS
  • Comparison of investment appraisal methods
  • Project ranking - how to choose the best alternative
  • Decision making under capital rationing
  • How to deal with inflation
  • Accounting measures versus economic measures
  • Dealing with risk and uncertainty
8. UNDERTAKING PROJECTS
Project definition
  • Project start-up
  • Proposal and initiation
Execution and control
  • Resource a project
  • Implementation planning
  • Allocation work
  • Gathering data and calculating progress
  • The control cycle
Finalization and close out
  • Finishing the work
  • Post completion reviews
WHO SHOULD ATTEND
  • Project managers
  • Project planners
  • Project controller
  • Stakeholders of the projects.
  • Other parties who are interested in financial project matters.
INSTRUKT0R & CV
Drs. Arif Budiarto , M.Si, Akuntan and Team
Education :
  1. Graduate S1 from accounting subject STIE YKPN Yogyakarta in 1991
  2. Master of Science in Accounting from Pasca Sarjana Programe,
  3. Economi department, Gadjah Mada University Yogyakarta in 1998.Accounting Profesional from Accoutant program (PPA) UGM tahun 2009. 
Expert and Experience :
  • Experience he ever become as Management consultant and finance.
  • Tax consultant
  • Media Editor Journal of Accounting Research, Auditing & Information, Faculty of Economics Trisakti 2000 – present,
  • Composer Tim consultants in Electricity Supply Cost of Goods (BPP) 2004/2005 study year in cooperation with the Faculty.
  • Consultant to study the formulation and adjustment of electricity tariffs 2006/2007 study year with PT Inti and DG LPE Jakarta Jakarta, Consultant to study the formulation of Subsidy Pattern for PLN and PIUKU year 2006/2007 study with PT Multi Decon and DG LPE Jakarta Jakarta,
  • Budget consultant at Bali Tabanan hospitals in 2004
  • Consultant to study deformation Legal Foundation Hospital
  • Pupuk Kaltim to form a Limited Liability Company Law Board (PT).
  • Trainer Audit Agency (BPK) at Jogjakarta region and Asset Restructuring of local government assistance teams DIY; then as Consultant to review Business Plan Preparation of the Regional Hospital (Hospital) in the province of Aceh in 2008, in cooperation with the German GTZ Consultant and Faculty of Medicine Gadjah Mada University.
  • Costing consultant for the study of computation in health centers and hospitals throughout Indonesia in 2009 till 2010.
  • Senior Trainer in Finance and accounting in some professional training institutions
  • Trainer senior asset appraisal and asset management at several institutions
  • Training senior field of Public Communication and CSR Implementation in some professional training institutions;
  • and Senior researcher at KPMAK, the center of the development and assessment of health financing, Faculty of Medicine, Gadjah Mada University with interest costing in health finance and public finance policy.
Running 
18 - 21 Maret 2013 (4 days) , tentative/as request 


FACILITIES
Certificate, Hand Out, Quality Training Kit ,
Training Material,
Convenient Training Facilities At Stars Hotel, Lunch & 2 X Coffee Breaks,
Souvenir.

VENUE

“Bandung” Golden Flower Hotel, Banana Inn Hotel, Nalendra Hotel and other Hotel 

CONTACT MITRA GLOBAL TRAINING CENTER (MGTC)
(Diana, Wulan, Riko)
Telephon (☎)  : (0274) 5305512
Mobile Phone : (0274) 5305512 /0812 2792 6688 /081390398896
E-mail ✉ : http://mitraglobaltrainingcenter.weebly.com
Blog : mitraglobaltc@gmail.com
Web : http://mgtc-jogja.blogspot.com


Jumat, 01 Maret 2013

Register Bulan Maret 2013


REGISTER Peserta Training Koordinasi Proteksi Sistem Tenaga Listrik Tanggal 18-21 Maret 2013. Perusahaan FMI telah meregisterkan peserta kepada kami. Kami tunggu Register dari peserta yang berminat dan membutuhkan training tersebut dari perusahaan yang lain. Terimakasih atas kepercayaannya kepada Kami, Mitra Global Training Center.


Office :  
Phone                  : (0274) 530 5512
E-mail                  : mitraglobaltc@gmail.com
web                      : mitraglobaltrainingcenter.weebly.com



*images from google